- AVIFRate
- ArDUMPino - Game cartridge ROM reader based on Arduino
- BT2VEC - XBOX One (Bluetooth) controller adapter for the Vectrex
- Ferramenta rombank para o "A GameBoy Emulator (agbe)"
- Ferramentas Java para imbNES com Linux
- IM Café
- KBD2SNES Adapter
- LinuxCrypt
- ListaTelemarMobile
- MCMania
- MD2PCE - Sega Genesis controller adapter for TG16/PC-Engine and USB
- PSX RetroPad Adapter
- PSX2VEC - Playstation controller adapter for the Vectrex
- RetroFi Adapter - Low-Latency 2.4G Wireless Multiplayer Joystick Adapter
- RetroPad32 Adapter
- RetroPad32 Multi-Out Add-on Board
- RetroPad32 USB Input Module
- RetroVGA Scanlines Generator
- SGCExplorer - Sega Genesis Cartridge Explorer
- STM32 HID Bootloader
- Simple Disk Catalog .Net
- SimpleFE - Simple Emulator FrontEnd
- USB RetroPad Adapter
- USB2Classic Adapter
- Wii RetroPad Adapter 2
MD2PCE is an adapter that allows you to connect Sega Genesis controllers to the TurboGrafx16, PC-Engine and also PC via USB (XInput). It's compatible with both 3 and 6 buttons Sega Genesis controllers. It also supports the 8BitDo M30 2.4g with its wireless DB9 receiver. MD2PCE Adapter starts in 2 button mode, which ensures 100% compatibility with all PCE/TG16 games catalog. For games supporting 6 button controllers, you can switch to 6 button mode, and also switching back to 2 button mode, by pressing the combo keys: UP + B + C + Start. Mappings for both 2 and 6 button modes are:
The adapter needs male-male 8 pin DIN (TG16) or Mini-DIN (PCE) cables that must be purchased separately.
For using on PC via USB, you'll need a mini-USB cable that also must be purchased separately. MD2PCE is open source and open hardware. Sources can be found at: https://github.com/bootsector/md2pce |
|||
